CVC Technologies, Inc. | Leading Global Equipment Supplier
Product
LabelingTop LabelerTop/Bottom LabelerWrap LabelerSpindle Wrap LabelerHigh Speed Wrap LabelerGallon Wrap LabelerVial/Ampoule Wrap LabelerHorizontal Wrap LabelerFront/Back LabelerFront/Back Labeler with Wrap StationNutraceutical and
Pharmaceutical packagingBottle UnscramblersDesiccant InserterElectronic Tablet/Capsule CountersCVC1220 High Speed Electronic Channel CounterCotton InserterCapperRetorquerEnd of Line
PackagingLoading and Accumulation TurntablesAutomatic Horizontal CartonerShrink Bundler & Heat Tunnel
All Categories > Nutraceutical and Pharmaceutical Packaging > Model CVC1205  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model CVC1205, Capper


The CVC1205 Capper is a very flexible machine designed to apply and tighten screw-on caps onto containers at rates of up to 120 bottles per minute. The CVC1205 is PLC controlled and comes standard with a 6" touch screen terminal and 4 sets of adjustable spindles. Options include tower lamp, hopper level control, cap inspection (level cap, foil seal, and no cap), reject, and reject verification.
  • Built to cGMP Standards
  • Stainless Steel Construction
  • 10 Channels of Memory
  • Quick & Easy Change Over
The CVC1205 In Line Spindle Capper is a very flexible machine designed to apply and tighten screw-on caps onto containers at rates of up to 120 bottles per minute. The CVC1205 is PLC controlled and comes standard with a 6" touch screen terminal and 4 sets of adjustable spindles. Options include tower lamp, hopper level control, cap inspection (level cap, foil seal, and no cap), reject, and reject verification.
  • Built to cGMP Standards
  • Stainless Steel Construction
  • 10 Channels of Memory
  • Quick & Easy Change Over




Standard Features  · Container Specifications  · Machine Specifications  · Air/Electrical Requirements  · Available Options  · Specification Notes  · Watch Video

Standard Features
  • PLC Controlled
  • 6" Touch Screen Panel to access all settings
  • Stainless Steel Construction
  • Memory capacity for 10 jobs
  • Cap tightening station with 4 sets of spindles
  • 1st Set of spindles run reverse direction
  • 9.1 cu ft. Cap Hopper Elevator
  • Capacity: up to 120 Bottles per minute (BPM)
  • ISO 9001:2000 Certified


Container Specifications

Cap Type
Plastic screw and CRC

Cap Height
1/2 to 3/4 in
13 to 19 mm

Cap Diameter
1 to 4-1/4 in
25 to 108 mm

Bottle Height
2 to 8-1/2 in
51 to 216 mm

Bottle Diameter

 View
1-1/4 to 4-1/2 in
32 to 114 mm

Minimum Body Height (Below Shoulder)
2 in
51 mm


Machine Specifications

Machine Weight
926 lbs
420 kg

Hopper Weight
397 lbs
180 kg

Noise Level
75 dB


Air/Electrical Requirements

Power
220 V

Frequency
50/60 Hz

Phase
Single

Power Consumption
7.5 A

Minimum Air Pressure

 View
87 psi

Air Consumption
15 to 20 ft³/min


Available Options

Conveyor Belt Width

 View
4-1/2 in (Standard)
6 in (Optional)
Cap Inspection Package (level cap, no cap, foil presence)
Double Gripping belt assembly
Hopper (Optional)
Hopper level control
Nitrogen Flushing Station
Press on cap system
Rejection System
Rejection verification check
Tower lamp
TST with OPC Code Software (21 CFR Part 11)


Specification Notes

Note
Dimensions shown are for a standard machine. This machine can run independently or can be integrated into an automated packaging line. All CVC equipment is covered by a one year parts warranty. Full Warranty details are included in our equipment proposals or can be found on our website.


Watch Video




 MORE IMAGES 

·  Capper - Machine Layouts


 DOWNLOADS 

CVC1205 In Line Spindle Capper Literature
(PDF, 327KB)

CVC1205 Capper Video


Copyright ©2015 CVC Technologies Inc. Privacy PolicySite Map | Site created by Thomas Web Solutionsand powered by Navigator Platform